
Electronics
Electronics designed to reduce the risk of failing safety and electromagnetic testing. Insulation, leakage and emissions are set against IEC 60601-1 at schematic stage, not after a failed test report.
When Electronics Design Is the Right Step
For any device with a battery, a mains supply or a sensor. The architecture should set the insulation before the first schematic, because the layout follows from it.

Turn a Breadboard into a Medical Board
A working breadboard or development-kit prototype that must become a board that can pass IEC 60601-1.

Build a Sensing Front End
Analog front ends for signals such as ECG, temperature or pressure, where noise and patient isolation shape the circuit.

Fix a Safety or EMC Problem
A board that failed, or is likely to fail, electrical safety or EMC testing and needs a redesign.
How Electronics Design Works
What You Bring and What You Get
You Bring
- What the device measures, powers or controls
- How it is powered: mains, battery or both
- Where it is used: hospital, home or in transit
- Your prototype or reference design, if any
- Limits on board size and shape
You Get Back
- Schematics and PCB layout
- Bill of materials
- Insulation diagram
- Bring-up records
- Pre-compliance results for safety and EMC
Questions Clients Ask
Why pre-test before the accredited lab?
A pre-compliance check finds the likely failures while the fix is still a small change. Lab time is booked and paid for, and a failed test means a redesign and a second booking.
What does IEC 60601-1-2 cover?
Electromagnetic disturbances: what the device emits, and how well it keeps working when exposed to them. The test levels depend on where the device is used, such as a hospital or a home.
Does a battery-powered device still need isolation?
Often, yes. A charger, a data cable or a connected accessory can bring mains voltage close to the patient. The insulation diagram shows each path and how it is protected.
Have a question about Electronics?
Opens the contact form with this service named. Nothing is sent until you press send.